List-Magnetik Magnetic Field Meters

From the question to the right device
Magnetic field measuring devices to measure residual magnetism The earth's magnetic field is 0.2 A / cm strong. Just a little more residual magnetism on steel parts and chips will stick. Recognize the magnetic field around your workpiece.
MP-800		MP-1000	MP-80
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.		For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.	Residual Magnetic Field Meter / Remanence Meter for the determination of residual magnetism on steel parts. Measuring probe: Axial field probe with a defined measuring distance of 2.0 mm from the surface.
more info		more info	more info

Magnetic field measuring devices to measure the peak value In order to detect the highest value of the magnetic field, the entire magnet must be examined. With the peak value memory you can be sure that you will not miss this point.
MP-800	MP-2000	MP-1000	MP-80
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.	Residual Magnetic Field Meter / Remanence Meter for the determination of residual magnetism on steel parts. Measuring probe: Axial field probe with a defined measuring distance of 2.0 mm from the surface.
more info	more info	more info	more info

Magnetic field measuring devices to measure the magnetic field on flat or curved material for example on sheet metal, spheres, cuboids - wherever you can see the surface and place the probe on
MP-800	MP-2000	MP-1000	MP-80
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance. Model MP-800A	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. With measuring probe P-A2 or P-A4	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. With measuring probe P-A2	Residual Magnetic Field Meter / Remanence Meter for the determination of residual magnetism on steel parts. Measuring probe: Axial field probe with a defined measuring distance of 2.0 mm from the surface.
more info	more info	more info	more info

Magnetic field measuring devices for measuring magnetic fields in gaps, notches, bores, on running surfaces - in other words, in places that cannot be reached with the axial probe. Or if the measuring direction has to be tangential.
MP-800	MP-2000	MP-1000
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance. Model MP-800T	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. With measuring probe P-T2 or P-T4	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. With measuring probe P-T2
more info	more info	more info

External probes for magnetic field measuring devices The probe is attached to a 1.5 m long spiral cable. The probe is easy to replace, and the cable can also be replaced separately if it is defective. An external probe is advantageous if the result cannot be read directly on the integrated measuring device.
	MP-2000	MP-1000
	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
	more info	more info

Magnetic field measuring devices with exactly 2 mm measuring distance A de facto industry standard when measuring the magnetic field strength on ball bearings is a 2 mm distance between the sensor and the end of the axial probe. This means that measurement results for the customer and supplier can be compared. Because: the distance is a major factor in the measured values.
MP-800	MP-2000	MP-1000	MP-80
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance. MP-800A	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. With measuring probe P-A2 or P-A4	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. With probe P-A2	Residual Magnetic Field Meter / Remanence Meter for the determination of residual magnetism on steel parts. Measuring probe: Axial field probe with a defined measuring distance of 2.0 mm from the surface.
more info	more info	more info	more info

Magnetic field measuring devices for measuring units of measurement Gauss (Gs or G) - instead of the standard A/cm, you can also measure in Gauss. Or in Oersted, an earlier unit in the CGS system of units. Both are equal in amount.
MP-800	MP-2000	MP-1000	MP-80
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.	Residual Magnetic Field Meter / Remanence Meter for the determination of residual magnetism on steel parts. Measuring probe: Axial field probe with a defined measuring distance of 2.0 mm from the surface.
more info	more info	more info	more info

Magnetic field measuring devices for measuring Tesla (T or Millitesla mT) units - The Tesla is a derived SI unit of measurement for magnetic flux density and is named after Nikola Tesla.
MP-800	MP-2000		MP-80
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.		Residual Magnetic Field Meter / Remanence Meter for the determination of residual magnetism on steel parts. Measuring probe: Axial field probe with a defined measuring distance of 2.0 mm from the surface.
more info	more info		more info

Magnetic field measuring devices for measuring alternating magnetic fields (AC) - Alternating magnetic fields are generated by coils through which alternating current flows. The magnetic field follows the level and direction of the applied voltage with a phase shift
MP-800	MP-2000	MP-1000
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
more info	more info	more info

Magnetic field measuring devices for measuring crack tests - an alternating magnetic field is generated by a coil, which induces eddy currents in the material to be examined. If the resulting alternating fields are homogeneous and constant, the material is OK. Cracks "swirl" the magnetic field; they can be recognized by cracks in the measured value.
MP-800	MP-2000	MP-1000
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
more info	more info	more info

Statistical values Evaluation of measurement series according to number, minimum, maximum, mean value and standard deviation
MP-800	MP-2000
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
more info	more info

Data logger Storage of measured values and statistical evaluation according to number, minimum, maximum, mean value and standard deviation
MP-800	MP-2000
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance. 500 values	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. 10000 values
more info	more info

Interfaces Transfer of the data to a PC or mobile Android device
MP-800	MP-2000
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance. Via Bluetooth to Windows PC and Android	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. Via USB cable to Windows PC
more info	more info

Printer A small mobile printer is ideal for direct documentation of measurements
MP-800	MP-2000
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance. Via bluetooth to the printer TOP-PRINT4	For professional measurement of direct and alternating fields. Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. By cable to the printer TOP-PRINT4
more info	more info