Select your language

List-Magnetik GmbH

Coating Thickness Meter MEGA-CHECK DX

The coating thickness tester MEGA-CHECK DX offers the possibility to connect a variety of different probes for the coating thickness measurement on metal

 

Coating Thickness Meter MEGA-CHECK DX

You can connect many specialized digital probes to the List-Magnetik MEGA-CHECK DX coating thickness meter. Applications on particularly small openings, on thick coatings and on small measuring points are thus easily possible. Special functions such as scan measurement for rough surfaces and duplex measurement for galvanized and additionally coated steel round off the performance spectrum.

Interference-free and precise measurement for coating thickness measurement

A completely newly developed digital probe technology allows very stable measurements due to its high sampling rate. For absolutely interference-free and precise measurement, the signals are already digitized in the probe. This results in very accurate, reproducible measurements.

Wide range of probes for the coating thickness gauge

At List-Magnetik you will find a wide range of probes for FE metals (iron and steel) and NFE metals (non-ferrous metals such as aluminum, brass, copper, bronze and non-magnetic stainless steel) as well as combined probes with automatic detection of the base material.

Measurements of coating thicknesses on a wide variety of coatings

The magnetic induction method allows measurements of paint, varnish, plastic, rubber, ceramics, zinc plating and galvanic coatings on steel. The eddy current method allows you to measure insulating coatings (paint, lacquer, plastic, anodizing) on non-ferrous metals.

Graphic display

The coating thickness gauge has a graphical LCD touch panel with an innovative operator guidance and a resolution of 320x480 pixels. The menu guidance is in German and English, further language packages can be installed. The blue silicone frame effectively protects the housing from damage.

Data logger and interface

With the flexibly divisible measured value memory, the freely definable calibration memories and the Bluetooth Low Energy interface to Windows, Android or iOS, you have all the possibilities to record and further process your measured values.

Special features: Scan, Duplex

The scan function allows you to scan a workpiece over a rough surface and statistically evaluate the data. With the additional analog display, the visualization of the measured values is supplemented to recognize trends and peak values even from the corner of your eye.

The duplex function simultaneously records the single layer thickness when measuring insulating layers on galvanized steel parts.

Scan Measurement

Duplex Measurement

Do you want to continuously scan a coating and determine the minimum and maximum? Scan measurement provides you with a graphical coating thickness curve with statistical evaluation. Do you want to evaluate galvanized and painted steel in one step and see both the zinc and paint coatings together? The duplex measurement is a quick way to view both simultaneously and statistically evaluate them separately.
Coating Thickness Meter MEGA-CHECK DX
Coating Thickness Meter MEGA-CHECK DX

Continuous operation

Power can be supplied by 3 AA batteries or an external source connected via USB. Thus, you can operate the device with a power bank or on the AC adapter.

Interchangeable probe cable for the meter

The probe cable, which can be plugged in at both ends, connects the display unit and digital probe and can be replaced effortlessly if the cable breaks.

High quality

All List-Magnetik MEGA-CHECK coating thickness gauges are high-quality products "Made in Germany".

Quality assurance through the coating thickness gauge

A coating thickness gauge is mostly used in the quality assurance of coating processes, for example to determine the thickness of a paint coating, in the testing of vehicles or steel structures, in fire protection (determining the coating thickness of steel doors). However, it is not only a coating thickness gauge, but also rubber coatings, anodizing and galvanic coatings can be measured.


MEGA-CHECK DX vs. Basic / Profi / Master

MEGA-CHECK DX has replaced the MEGA-CHECK Basic / Profi / Master models, which have been proven for 15 years. The measurement technology of the new generation of DX probes has been greatly improved. A big advantage is the graphic display with many additional functions such as scan measurement and analog display. MEGA-CHECK DX offers a more comfortable memory function. The Bluetooth interface to Windows PC as well as Android and iOS mobile devices can exchange individual measurements and memory contents with the free Lima Connect app.


Manage and send measurement data with a free application

To further process your measurement data, you can pair your measuring device with mobile Android and iOS devices. Or you communicate with a Windows PC. This is made possible by Bluetooth Low Energy technology (BLE). With the Lima Connect app you can manage projects and assign the measuring points on a photo. The measurement results can be statistically evaluated and displayed graphically. The app for Android, iOS and Windows is free.

Data transfer application Lima Connect

 

Technical Data Coating Thickness Meter MEGA-CHECK DX

Application: Depending on the selection of the probe, measurement of paint, lacquer, plastic and galvanic layers on steel, measurement of insulating layers on non-ferrous metals with automatic recognition of the base material.
Standards: ISO 2178, ISO 2360, BS 5411, ASTM
Measuring probe: measuring range depending on probe
on steel and iron up to 30 mm (30,000 µm),
on NFE metals up to 2 mm (2000 µm),
minimum area, minimum radius of curvature and calibration value
are also depending on probe
Accuracy: below 100 µm ± 1 µm, 100-1000 µm: ± 1 %, 1000-2000 µm: ± 3 %, > 2000 µm: ± 5 %
Resolution: 1-100 µm: 0.1 µm, 100-1000 µm: 1 µm, > 1000 µm: 10 µm
Measuring units: µm and mils
Ambient temperature: 0 - 50° C
Display: LCD touch panel color 320x480 pixel
Multilingual menu: German, English, Italian, French, Spanish
Scan function: for accurate measurement on rough or blasted surfaces
Duplex function: for exact determination of single layer thickness when measuring insulating layers on galvanized steel parts (zinc layer must be > 60 µm)
Data logger: 10,000 measurements, flexibly divisible
Statistics: Count / Maximum / Minimum / Average / Standard deviation
Calibration memory: flexible number of calibration configurations storable
Interface: Bluetooth Low Energy interface for communication with Android, iOS and Windows
App for Android, iOS, Windows: free of charge via Google Play Store, Apple App Store, List-Magnetik website
Power supply: 3x 1.5 V AA Mignon. External power supply can be connected via USB-C
Operating time: approx. 25 hours with battery, unlimited with external power supply
Dimensions: 150 x 85 x 35 mm
Weight: 320 g with batteries
Data sheet MEGA-CHECK DX

 

Technical data of the probes:

Model FE or NFE Description
Measuring range
Smallest Area
Smallest
curvature radius
DX52-D FE + NFE combined Dual probe with sliding sleeve
and prism
FE 0-5000 µm
NFE 0-2000 µm
ø 8 mm
convex: FE 4 mm,
NFE 6 mm
concave: 38 mm
DX52-DP FE + NFE combined Dual probe with sliding sleeve
and prism, pivotable
FE 0-5000 µm
NFE 0-2000 µm
ø 8 mm
convex: FE 4 mm,
NFE 6 mm
concave: 38 mm
DX5-F FE Standard FE probe with sliding sleeve and prism
0-5000 µm
ø 4 mm
convex: 4 mm
concave: 38 mm
DX5-FP FE Standard FE probe with sliding sleeve and prism, pivotable
0-5000 µm
ø 4 mm
convex: 4 mm
concave: 38 mm
DX1-F FE Spring-loaded probe for small parts and complex surfaces
0-1000 µm
ø 2 mm
convex: 1 mm
concave: 6 mm
DX30-F FE Two-point probe for very thick layers
0-30000 µm
ø 40 mm
convex: 15 mm
concave: 60 mm
DX1-FT FE Transverse rod probe for small interiors and tubes
0-1000 µm
ø 2 mm
convex: 2 mm
concave: 16 mm
DX3-FT FE Transverse rod probe for small interiors and tubes
0-3000 µm
ø 3 mm
convex: 2 mm
concave: 8 mm
DX7-F FE FE probe for thick layers with spring-loaded guide and prism
0-7000 µm
ø 4 mm
convex: 4 mm
concave: 38 mm

Models and scope of supply Coating Thickness Meter MEGA-CHECK:

Coating Thickness Meter MEGA-CHECK DX without probe, with probe cable, USB Bluetooth receiver, calibration base plates FE+NFE, 2 calibration foils and case, including calibration certificate.
The measuring probe must be ordered additionally.
Coating Thickness Meter MEGA-CHECK DX Coating Thickness Meter MEGA-CHECK DX
Dual function probe DX52-D: Dual probe with sliding sleeve and prism for measurement on iron and steel base up to 5 mm, and on non-ferrous metal up to 2 mm coating thickness Dual function probe DX52-D Coating Thickness Meter MEGA-CHECK DX
Dual function probe DX52-DP: Dual probe with sliding sleeve and prism, pivotable, for measurement on iron and steel base up to 5 mm, and on non-ferrous metal up to 2 mm coating thickness Dual function probe DX52-DP Coating Thickness Meter MEGA-CHECK DX
Magnetic inductive probe DX5-F: Standard probe with sliding sleeve and prism for measurement on iron and steel base up to 5 mm coating thickness Magnetic inductive probe DX5-F Coating Thickness Meter MEGA-CHECK DX
Magnetic inductive probe DX5-FP: Standard probe with sliding sleeve and prism, pivotable, for measurement on iron and steel base up to 5 mm coating thickness Magnetic inductive probe DX5-FP Coating Thickness Meter MEGA-CHECK DX
Magnetic inductive sensing probe DX1-F: Spring-loaded probe for small parts and complex surfaces, on uneven or complex iron and steel base, up to 1 mm Magnetic inductive sensing probe DX1-F Coating Thickness Meter MEGA-CHECK DX
Magnetic inductive probe DX30-F: Two-point probe for measurement of very thick coatings on iron and steel base up to 30 mm coating thickness, with calibration base plate Magnetic inductive probe DX30-F Coating Thickness Meter MEGA-CHECK DX
Magnetic inductive transversal probe DX1-FT: Rod-shaped transversal probe for measurement in very small internal spaces such as splines and grooves on substrate iron and steel up to 1 mm layer thickness Magnetic inductive transversal probe DX1-FT Coating Thickness Meter MEGA-CHECK DX
Magnetic inductive transversal probe DX3-FT: Rod-shaped transversal probe for measurement in small interior spaces or pipes on substrate iron and steel up to 3 mm layer thickness Magnetic inductive transversal probe DX3-FT Coating Thickness Meter MEGA-CHECK DX
Magnetic inductive probe DX7-F: Probe with sliding sleeve and prism for measurement of thick layers on iron and steel base up to 7 mm coating thickness, with calibration block Magnetic inductive probe DX7-F Coating Thickness Meter MEGA-CHECK DX

 

 

Measuring instruments by List-Magnetik - Made in Germany - Quality and durability

Firmware Update LMG4

Firmware Update
MEGA-CHECK DX / MP-4000 / FerroPro compact
Revision 510 Build 354

Click here for Update

Coating Thickness Meter TOP-CHECK

Coating Thickness Meter TOP-CHECK

 

Coating Thickness Meter TOP-CHECK Ferro-1000

Coating Thickness Meter TOP-CHECK Ferro-1000

 

Sales Partner

 

Catalog Coating Thickness Measuring

Catalog Coating Thickness Measuring