Select your language

List-Magnetik GmbH

Coating Thickness Meter TOP-CHECK

Coating Thickness Meter TOP-CHECK

TOP-CHECK - The unique Coating Thickness Meter with integrated swivel-mounted probe

With the integrated, world-wide unique 90° swivel-mounted probe of the List-Magnetik TOP-CHECK coating thickness meters, you always carry out precise measurements. The compact, lightweight devices are barely larger than a probe and are therefore ideal for on-site applications in areas that are difficult to access. For interference-free measurements in harsh environments, the handy metal housing is splash-proof, in accordance with IP 64. Optionally, we also offer coating thickness tester equipment with flow-water protection. The measuring probe has a wear-resistant ruby probe pole for a long service life with frequent measurement on rough surfaces.

The coating thickness gauges are very easy to use, with the press of a single button, and the self-explanatory multilingual menu.

Quality in the coating thickness measurement

A coating thickness meter is usually used in the quality assurance of coating processes, for example to determine the paint thickness of a paint job, in the testing of vehicles or steel structures, in fire protection (determination of the layer thickness of steel doors). It is not only a paint thickness gauge, but also gumming, anodizing and galvanic coatings can be measured.

Coating Thickness Meter TOP-CHECK

Combined probe with magnetic-inductive measuring method and eddy current method

TOP-CHECK Dual has a combined probe that measures insulating layers of paint, varnish, plastic, rubber, ceramics and galvanic coatings (except nickel) in a magnet-inductive measuring method. The device is used on iron and steel subsoil. It is also suitable for measuring insulating layers (e.g. paint, plastic), using the eddy current method, on non-ferrous metals such as aluminum, brass, copper, bronze and non-magnetic stainless steels, according to ISO 2178 and ISO 2360. TOP-CHECK FN is the device version without data logger and Bluetooth interface.

Measure insulating layer thicknesses on iron and steel

TOP-CHECK Ferro is ideal for iron and steel substrates. The device measures layers of lacquer, paint, plastic, rubber, ceramic, zinc and galvanic coatings (except nickel) according to ISO 2178. TOP-CHECK FE is the device version without data logger and Bluetooth interface.

Manage and send measurement data with a free application

To further process your measurement data, you can pair your measuring device with mobile Android and iOS devices. Or you communicate with a Windows PC. This is made possible by Bluetooth Low Energy technology (BLE). With the Lima Connect app you can manage projects and assign the measuring points on a photo. The measurement results can be statistically evaluated and displayed graphically. The app for Android, iOS and Windows is free.

Data transfer application Lima Connect

On request: Coating Thickness Meter TOP-CHECK IP67 water protection

Coating Thickness Meter TOP-CHECK-IP67

 

Service tool

The free Windows app Lima Service is available on our homepage. You can use it to install additional language packages (besides German and English) on your TOP-CHECK Dual or TOP-CHECK Ferro. You can use it to set the time on your device that will be used during data transfer.

If there is a malfunction of the device, you can read data from the device, which will help our technicians in telephone support to analyze it. Thus, we may be able to remedy the situation without you having to send in the device and lose time.

The application runs on Windows 10 and Windows 11. Older Windows versions are not tested.

Download Lima Service

Service tool for TOP-CHECK

 

Technical Data Coating Thickness Meter TOP-CHECK

Applications: Measurement of paint, lacquer, plastic and galvanic coatings on steel (ISO 2178) / insulating coatings on non-ferrous metals (ISO 2360; only with TOP-CHECK Dual/FN), Automatic detection of base material
Measuring probe: swivels by 90°
Measuring range: on steel and iron 0-5000 µm, on NFE metals 0-2000 µm
Smallest measuring area: TOP-CHECK Dual/FN ø 8 mm, TOP-CHECK Ferro/FE ø 4 mm
Minimum radius of curvature: concave 38 mm, convex TOP-CHECK Dual/FN 6 mm, TOP-CHECK Ferro/FE 4 mm
Calibration value: 300 µm
Accuracy: below 100 µm ± 1 µm, 100-1000 µm: ± 1 %, 1000-2000 µm: ± 3 %, > 2000 µm: ± 5 %
Resolution: 1-100 µm: 0.1 µm, 100-1000 µm: 1 µm, > 1000 µm: 10 µm
Measuring units: µm and mils
Ambient temperature: 0 - 50° C
Display: illuminated high-contrast graphic OLED display
Multilingual menu navigation: German, English, for TOP-CHECK Dual/Ferro further language packages possible
Data logger: 4000 measured values flexibly divisible (TOP-CHECK Dual/Ferro only)
Statistics: count / maximum / minimum / average / standard deviation (TOP-CHECK Dual/Ferro only)
Interface: Bluetooth Low Energy interface for communication with Android, iOS and Windows (TOP-CHECK Dual/Ferro only)
App for Android, iOS, Windows: free of charge via Google Play Store, Apple App Store, List-Magnetik website
Power supply: 1x 1.5 V AA Mignon
Operating time: approx. 50 hours
Dimensions: Ø 28 x 95 mm
Weight: 76 g (with battery)
Data sheet TOP-CHECK

 

Models and scope of delivery Coating Thickness Meter TOP-CHECK

Coating Thickness Meter TOP-CHECK Dual with USB Bluetooth receiver, calibration base plates FE+NFE, 2 calibration foils, spare battery and case, including calibration certificate. The app for Android, iOS and Windows is free.  Coating Thickness Meter TOP-CHECK Dual Coating Thickness Meter TOP-CHECK Dual
Coating Thickness Meter TOP-CHECK Ferro with USB Bluetooth receiver, calibration base plate FE, 2 calibration foils, spare battery and case, including calibration certificate. The app for Android, iOS and Windows is free. Coating Thickness Meter TOP-CHECK Ferro Coating Thickness Meter TOP-CHECK Ferro
Coating Thickness Meter TOP-CHECK FN with calibration base plates FE+NFE, 2 calibration foils, spare battery and case, including calibration certificate Coating Thickness Meter TOP-CHECK FN Coating Thickness Meter TOP-CHECK FN
Coating Thickness Meter TOP-CHECK FE with calibration base plate FE, 2 calibration foils, spare battery and case, including calibration certificate Coating Thickness Meter TOP-CHECK FE Coating Thickness Meter TOP-CHECK FE

 


 

Animations and Videos Coating Thickness Meter TOP-CHECK

 

 

 

 

Coating Thickness Meter TOP-CHECK

 

 

Measuring instruments by List-Magnetik - Made in Germany - Quality and durability

Firmware Update TOP-CHECK

Firmware Update
TOP-CHECK Dual, Ferro, Ferro-1000
Revision 338

Click here for Update

Coating Thickness Meter TOP-CHECK Ferro-1000

Coating Thickness Meter TOP-CHECK Ferro-1000

 

Coating Thickness Meter MEGA-CHECK DX

Coating Thickness Meter MEGA-CHECK DX

 

Sales Partner

 

Catalog Coating Thickness Measuring

Catalog Coating Thickness Measuring