Applications TRANSFER, TRANSFER-EXCEL, STAT-6
Data transfer application TRANSFER
With the free-of-charge data transfer application TRANSFER, you can transfer measurement data from various List-Magnetik instruments to the PC, and evaluate it in Microsoft Excel.
The data is stored in ASCII format, can be displayed an edited in TRANSFER and be copied to other applications via clipboard.
Sources can be the Coating Thickness Meters MEGA-CHECK Profi, MEGA-CHECK Master and TOP-CHECK, or the Magnetic Field Meters MP-800 and MP-2000 as well. Older devices are still supported: Concrete Thickness Meter BDT-ST/BDT-ST II, MEGA-CHECK 5F-ST / 5FN-ST / 10-ST / 20-ST / 80F-ST, MEGA-CHECK FE-S / FN, EASY-CHECK FE-S / FN, the Magnetic Field Meters MPU-ST and MP-100.
The application runs on Windows 10, Windows 8.1, Windows 7, and Windows Vista (32 + 64-bit versions).
Download TRANSFER V16.2 English
Data transfer application TRANSFER-EXCEL®
Important note for a known error:
TRANSFER-EXCEL only works with the 32bit versions of Office 2007/2010/2013/2016
If the error message "Object can not be inserted" appears when starting the program, please proceed as described in http://support.microsoft.com/kb/3025036.
With the free data transfer application TRANSFER-EXCEL you can transfer measured data from various List-Magnetik measuring devices to the PC and evaluate them in Microsoft Excel.
Sources can be the layer thickness gauges MEGA-CHECK Profi, MEGA-CHECK Master, EASY-CHECK and TOP-CHECK (until 2016), or the magnetic field measuring devices MP-800 and MP-2000. Older devices will be supported until further notice.
The Excel form directly accesses the serial interface of the PC so that a manual import of the measured data is not necessary.
The program runs under Windows 10, Windows 8.1, Windows 7 and Windows Vista (32 + 64-bit versions) and the Excel versions as of Microsoft Office 97.
® All other trademarks are trademarks or registered trademarks of MICROSOFT COOPERATION
for TOP-CHECK FE-B/FN-B up to 2016 (Firmware version up to 4.x)
for MEGA-CHECK Master/Profi up to April 2019 (Firmware version up to 14.x)
for MP-2000 up to April 2019 (Firmware version up to 14.x)
Graphical evaluation software STAT-6
With the free graphic evaluation software STAT-6, measurement data from various List-Magnetik measuring instruments can be displayed on the PC, statistically evaluated and processed in bar graphs or line graphs.
Sources can be the layer thickness gauges MEGA-CHECK Profi, MEGA-CHECK Master, EASY-CHECK and TOP-CHECK (until 2016), or the magnetic field measuring devices MP-800 and MP-2000. An online measurement with data connection via cable or Bluetooth is also possible. Older devices will be supported until further notice.
The program runs under Windows 10, Windows 8.1, Windows 7 and Windows Vista (32 + 64-bit versions) and the Excel versions as of Microsoft Office 97.
for TOP-CHECK FE-B/FN-B up to 2016 (Firmware version up to 4.x)
for MEGA-CHECK Master/Profi up to April 2019 (Firmware version up to 14.x)
for MP-2000 up to April 2019 (Firmware version up to 14.x)
