With this USB interface cable, you can connect the coating thickness meters MEGA-CHECK Profi and MEGA-CHECK Master as well as the magnetic field meter MP-2000 to a PC. Since the end of 2016, it has been supplied as standard with these devices.
Transversal Field Probe P-T4 to measure magnetic fields with MP-2000
The transversal field probe measures the field in a 90 degree angle to the axis of the probe.
Axial Field Probe P-A4 to measure magnetic fields with MP-2000
The axial field probe measures the field along the longitudinal axis of the probe.
Transversal Flexible Reed Probe P-Z4 to measure magnetic fields with MP-2000
The transversal flexible reed probe is a tangential field sensor and measures the field in a 90 degree angle to the axis of the probe. It is flexible by approx. 5 degrees.
The LIST-MAGNETIK MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without problems.
MEGA-CHECK Master is a high-end device with easy to use functions for many different applications. In addition to the performance of MEGA-CHECK Profi, MEGA-CHECK Master has a scan function for determining the thickness of the coating on rough or blasted surfaces.
Furthermore, there is a duplex function for the precise determination of the individual layer thickness for measurements of insulating layers on galvanized steel parts.
In the case of continuous measurement of the layer thickness, the analogous representation of the measured value profile proves to be an important support.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm. The probe head can be swiveled 90°.
The List-Magnetik MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without any problems.
MEGA-CHECK Profi is based on the MEGA-CHECK Basic, and additionally, has a data logger and an RS232 interface. The easy statistical evaluation and documentation of the measurement results is carried out via a connected PC or a printer. Three calibration memories are available to store special parts calibrations.
This Product was added to our catalogue on 01/04/2008.