Calibration foil set with Certificate

Magnetic inductive probe for MEGA-CHECK Basic / Profi / Master for coating thickness measurement on iron and steel base up to 5 mm. The probe head can be swiveled 90°.

• Warranty: 3 months
• Customs tariff no.: 9031 9000

The List-Magnetik MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without any problems.

MEGA-CHECK Profi is based on the MEGA-CHECK Basic, and additionally, has a data logger and an RS232 interface. The easy statistical evaluation and documentation of the measurement results is carried out via a connected PC or a printer. Three calibration memories are available to store special parts calibrations.

• Applications, measuring range: depending on the connected probe
• Accuracy: less than 100 µm ± 1 µm, 100-1000 µm: ± 1%, 1000-2000 µm: ± 3%,> 2000 µm: ± 5%
• Data logger: 10,000 measurements
• Statistics: Count / Maximum / Minimum / Average / Standard deviation
• Calibration memory: 3 calibration memories for storing individual calibrations
• Interface: RS232 interface with USB cable for communication with PC and printer
• Warranty: 12 months
• Customs tariff no.: 9031 8020

Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm. The probe head can be swiveled 90°.

• Warranty: 3 months
• Customs tariff no.: 9031 9000

The LIST-MAGNETIK MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without problems.

MEGA-CHECK Master is a high-end device with easy to use functions for many different applications. In addition to the performance of MEGA-CHECK Profi, MEGA-CHECK Master has a scan function for determining the thickness of the coating on rough or blasted surfaces.
Furthermore, there is a duplex function for the precise determination of the individual layer thickness for measurements of insulating layers on galvanized steel parts.
In the case of continuous measurement of the layer thickness, the analogous representation of the measured value profile proves to be an important support.

• Applications, measuring range, smallest measuring area: depending on the connected probe
• Accuracy: less than 100 µm ± 1 µm, 100-1000 µm: ± 1%, 1000-2000 µm: ± 3%,> 2000 µm: ± 5%
• Analog display: Analog measured value display with continuous measurement
• Scan function: for accurate measurement on rough or blasted surfaces
• Duplex function: for the exact determination of the individual layer thickness for measurements of insulating layers on galvanized steel parts
• Data logger: 10,000 measurements, divisible into 100 batches
• Statistics: Count / Maximum / Minimum / Average / Standard deviation
• Calibration memory: 3 calibration memories for storing individual calibrations
• Interface: RS232 interface with USB cable for communication with PC and printer
• Warranty: 12 months
• Customs tariff no.: 9031 8020

Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master / Pocket, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm.

• Warranty: 3 months
• Customs tariff no.: 9031 9000