Materials testing
Here you will find permeability and ferrite content meters from List-Magnetik.
Is your stainless steel magnetizable? Measure the permeability.
List-Magnetik FerroPro compact - Convenient and robust instrument for measuring the relative magnetic permeability µr between 1 and 5
- Measuring range: µr = 1.000 to 5.000
- Accuracy at 20°C: (µr - 1) x 5%, can be readjusted
- Resolution: 0.001
- Display: LCD color touch panel 320x480 pixels
- Menu navigation: English, French, German, Italian, Spanish
- Data logger: 10,000 measurements, flexibly divisible
- Statistics: Count / Maximum / Minimum / Average / Standard deviation
- Interface: wireless interface to communicate with Android, iOS and Windows
- App for Android, iOS, Windows: free via Google Play Store, Apple App Store, List-Magnetik website
- Power supply: 3x 1.5V AA Mignon. External power supply connectable via USB
- Operating time: Approximately 25 hours with battery, unlimited with external power source.
- Warranty: 24 months
- Customs tariff no.: 9031 8080
Magnet permeability probe FPC-5 for measurement with the magnet permeability meter FerroPro compact
- Measuring range: µr = 1 to 5
- Dimension: diameter 13 mm, length 39 mm
- Warranty: 3 months
- Customs tariff no.: 9031 8080
The List-Magnetik FERRITE-CHECK 240 is a convenient color display instrument with external probe for measuring the ferrite content in austenitic and duplex steels according to the Basel standard DIN EN ISO 8249 using the magnetic induction method.
- Application: Measurement of ferrite content in austenitic and duplex steels.
- Probe: Ferrite-2000, special probe for ferrite testing. Externally connected
- Measuring range: 0.2 - 100 Fe%, 0.2 - 140 FN
- Measurement method: Single measurement or scanning
- Smallest measuring area: ø 2 mm
- Display: LCD color touch panel 320x480 pixels
- Data logger: 10,000 measurements, flexibly divisible
- Statistics: count / maximum / minimum / average / standard deviation
- Interface: wireless interface for communication with Android, iOS and Windows
- App for Android, iOS, Windows: free via Google Play Store, Apple App Store, List-Magnetik website
- Warranty: 24 months
- Customs tariff number: 9031 8020
The List-Magnetik FERRITE-CHECK 140 ferrite content meter is a compact and handy device with an integrated probe for measuring the ferrite content in austenitic and duplex steels according to the Basel standard DIN EN ISO 8249 using the magnetic induction method.
- Application: Measurement of ferrite content in austenitic and duplex steels.
- Measuring range: 1 – 100 Fe%, 1 – 140 FN
- Measuring method: single measurement or continuous measurement with averaging
- Smallest measuring area: ø 2 mm
- Data logger: 4000 measured values flexibly divisible
- Statistics: count / maximum / minimum / average / standard deviation
- Interface: wireless interface for communication with Android, iOS and Windows
- Warranty: 24 months
- Customs tariff number: 9031 8020
The compact List-Magnetik FLUX-CHECK 250 fluxmeter is a new handheld instrument of this size for determining the magnetic flux Phi of a magnet system or a single magnet.
In combination with the List-Magnetik Helmholtz Torque Coil HM-1, the magnetic flux of permanent magnets can be determined very precisely, since the entire volume of the magnet is measured, regardless of its position. The effect of the magnet on the coil is measured as an electrical voltage and converted to a flux value. In addition to the Helmholtz HM-1 torque coil, all types of coils or coil probes can be connected to the instrument.
- Measuring units: magnetic flux mVs (milli-Volt-second, corresponds to the SI unit mWb / milli-Weber; Measuring ranges: 0-10 mVs and 0-250 mVs, automatic or manual range switching; Real flux: mVs / n; Magnetic moment: mVs * cm; Flux density: A/cm or mT
- Display: LCD touch panel color 320x480 pixel
- Statistics: Count / Maximum / Minimum / Average / Standard deviation
- Interface: wireless interface for communication with Android, iOS and Windows
- App for Android, iOS, Windows: free of charge via Google Play Store, Apple App Store, List-Magnetik website
- External control: via USB and SCPI communication interface
- Power supply: 3x 1.5 V AA Mignon. External power supply can be connected via USB
- Warranty: 24 months
- Customs tariff number: 9031 8080
The compact List-Magnetik FLUX-CHECK 250 fluxmeter is a new handheld instrument of this size for determining the magnetic flux Phi of a magnet system or a single magnet.
In combination with the List-Magnetik Helmholtz Torque Coil HM-2, the magnetic flux of permanent magnets can be determined very precisely, since the entire volume of the magnet is measured, regardless of its position. The effect of the magnet on the coil is measured as an electrical voltage and converted to a flux value. In addition to the Helmholtz HM-2 torque coil, all types of coils or coil probes can be connected to the instrument.
- Measuring units: magnetic flux mVs (milli-Volt-second, corresponds to the SI unit mWb / milli-Weber; Measuring ranges: 0-10 mVs and 0-250 mVs, automatic or manual range switching; Real flux: mVs / n; Magnetic moment: mVs * cm; Flux density: A/cm or mT
- Display: LCD touch panel color 320x480 pixel
- Statistics: Count / Maximum / Minimum / Average / Standard deviation
- Interface: wireless interface for communication with Android, iOS and Windows
- App for Android, iOS, Windows: free of charge via Google Play Store, Apple App Store, List-Magnetik website
- External control: via USB and SCPI communication interface
- Power supply: 3x 1.5 V AA Mignon. External power supply can be connected via USB
- Warranty: 24 months
- Customs tariff number: 9031 8080
The Portable Demagnetizing Device List-Magnetik HE-20 is a portable device for mobile or stationary applications. It produces an alternating magnetic field of 50 Hz with sufficient field strength for alloyed steels.
- Dimensions: 360 x 280 x 95 mm
- Weight: 12 kg
- Active Pole Surface: 200 x 20 mm
- Field Strength: 350 A/cm outer, 200 A/cm center
- Power consumption: 35 W
- Warranty: 12 months
- Customs tariff no.: 8543 7090
A calibration standard is a reference sample with which a FerroPro/Ferromaster permeability measuring device can be checked for its measuring accuracy.
- Reference value: Available in several reference values µr: ~1.03 - ~1.11 - ~1.35
- The exact value may vary and is indicated on the calibration standard.
- Warranty: 24 months
- Customs tariff no.: 9031 9000
A calibration standard is a reference sample with which a FerroPro/Ferromaster permeability measuring device can be checked for its measuring accuracy.
- Reference value: Available in several reference values µr: ~1.03 - ~1.11 - ~1.35
- The exact value may vary and is indicated on the calibration standard.
- Warranty: 24 months
- Customs tariff no.: 9031 9000
A calibration standard is a reference sample with which a FerroPro/Ferromaster permeability measuring device can be checked for its measuring accuracy.
- Reference value: Available in several reference values µr: ~1.03 - ~1.11 - ~1.35
- The exact value may vary and is indicated on the calibration standard.
- Warranty: 24 months
- Customs tariff no.: 9031 9000
Ferrite content probe FERRITE-2000 for ferrite content measurement with FERRITE-CHECK 240.
- Warranty: 3 months
- Customs tariff no.: 9031 9000
Cables for other devices, as well as overlength cables, please request separately.
Die Box kann unter tpl_modified_responsive/boxes/box_miscellaneous.html verändert werden. Die Sprachvariablen befinden sich in der Datei tpl_modified_responsive/lang/german/lang_german.custom.