Transversal Flexible Reed Probe P-Z4 to measure magnetic fields with MP-2000 The transversal flexible reed probe measures the field in a 90 degree angle to the axis of the probe. It is flexible by approx. 5 degrees and is suitable for measuring in air gaps, hollow spaces or on the surface of workpieces (e.g. for crack testing). |
|
Technical Data: |
|
Measuring range: |
0-40,000 A/cm / 0-40,000 Gauss / 0-4 T |
Hall Sensor distance: |
0.4 mm |
Probe thickness: |
0.7 mm |
Total length of the probe: |
150 mm |
Length of the probe handle: |
85 mm |
Width of the probe reed: |
4.3 mm |
Warranty:
|
3 months |
Customs tariff no.:
|
9031 8080 |
Axial Field Probe P-A4 to measure magnetic fields with MP-2000
The axial field probe measures the field along the longitudinal axis of the probe.
Transversal Field Probe P-T4 to measure magnetic fields with MP-2000
The transversal field probe measures the field in a 90 degree angle to the axis of the probe.
With this USB interface cable, you can connect the coating thickness meters MEGA-CHECK Profi and MEGA-CHECK Master as well as the magnetic field meter MP-2000 to a PC. Since the end of 2016, it has been supplied as standard with these devices.
The List-Magnetik MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without any problems.
MEGA-CHECK Basic is the standard device for rapid on-site measurement.
This Product was added to our catalogue on 20/04/2009.