Transversal Field Probe P-T4

Calibration chamber for magnetic field measuring probes shielded from the earth's magnetic field

• Thickness of the mu-metal: 3 x 0.10 mm
• External dimensions: 83 x 30 x 27 mm
• Opening for probe: 72 mm x d = 10 mm
• Warranty: 12 months
• Customs tariff no.: 9031 9000

Axial Field Probe P-A4 to measure magnetic fields with MP-2000

The axial field probe measures the field along the longitudinal axis of the probe.

• Measuring range: 0-40,000 A/cm / 0-40,000 Gauss / 0-4 T
• Warranty: 3 months
• Customs tariff no.: 9031 8080

A calibration standard is a reference magnet with which an axial or tangential measuring probe matched to it can be checked for accuracy by the user.

• Reference value: 180 A/cm
• Warranty: 12 months
• Customs tariff no.: 8505 1100

The calibration standard is only available as an accessory for a List-Magnetik magnetic field meter with axial or tangential probe (P-A2, P-A4, P-T2, P-T4, MP-800), not for reed probes or for devices of other manufacturers. When ordering, please let us know for which probe the calibration standard is to be used.

With this USB interface cable, you can connect the coating thickness meters MEGA-CHECK Profi and MEGA-CHECK Master as well as the magnetic field meter MP-2000 to a PC. Since the end of 2016, it has been supplied as standard with these devices.

Transversal Flexible Reed Probe P-Z4 to measure magnetic fields with MP-2000

The transversal flexible reed probe is a tangential field sensor and measures the field in a 90 degree angle to the axis of the probe. It is flexible by approx. 5 degrees.

• Measuring range: 0-40,000 A/cm / 0-40,000 Gauss / 0-4 T
• Warranty: 3 months
• Customs tariff no.: 9031 8080