A calibration standard is a reference magnet with which an axial or tangential measuring probe matched to it can be checked for accuracy by the user. If the probe is working properly, the measured value specified on the corresponding calibration standard is reached. In case of deviations outside the tolerance, a factory calibration of the measuring instrument, probe and calibration standard is recommended. |
|
Technical Data:
|
|
Reference value:
|
180 A/cm |
Target device:
|
Magnetic Field Meter MP-800, MP-1000 or MP-2000 |
Dimensions:
|
diameter 49 mm, height 41 mm |
Warranty:
|
12 months |
Customs tariff no.:
|
8505 1100 |
The calibration standard is only available as an accessory for a List-Magnetik magnetic field meter with axial or tangential probe (P-A2, P-A4, P-T2, P-T4, MP-800), not for reed probes or for devices of other manufacturers. When ordering, please let us know for which probe the calibration standard is to be used.
Angular Axial Probe P-W2 to measure magnetic fields with MP-1000 and MP-2000
The axial field probe measures the field along the longitudinal axis of the probe. The angled tip allows measurement in gaps.
Experience a revolution in measurement technology with the List-Magnetik MP-4000 professional magnetic field meter. This instrument uses external digital axial and transverse field probes to make precise measurements of DC and AC magnetic fields, as well as pulsed fields of any type. Applications range from geomagnetic fields to field strengths of 40,000 A/cm.
It supports a wide range of magnetic field measurement applications with flexible data storage, a combined digital and analog display, and peak value measurement. The Bluetooth interface allows data transfer to a Windows PC as well as to Android and iOS apps. The USB-C interface allows the device to be permanently connected to an external power source.
Transversal Field Probe PM2-T to measure magnetic fields with MP-1000 and MP-2000
The tangential field probe measures the field in a 90 degree angle to the axis of the probe.
List-Magnetik MP-800TL differs from MP-800AL only in the probe: it has a transversal field probe (1.7 mm thickness with Hall Sensor distance of 0.9 mm) instead of an axial probe.
Calibration chamber for magnetic field measuring probes shielded from the earth's magnetic field
Is your stainless steel magnetizable? Measure the permeability.
List-Magnetik Ferromaster - Convenient and robust instrument for measuring the relative magnetic permeability µr between 1 and 5
This Product was added to our catalogue on 18/06/2010.