The List-Magnetik MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without any problems.
MEGA-CHECK Profi is based on the MEGA-CHECK Basic, and additionally, has a data logger and an RS232 interface. The easy statistical evaluation and documentation of the measurement results is carried out via a connected PC or a printer. Three calibration memories are available to store special parts calibrations.
List-Magnetik TOP-CHECK coating thickness meters work with an integrated, unique 90° swivel-mounted probe. The compact devices are barely larger than a measuring probe and are therefore ideally suited for on-site applications in places which are difficult to access.
like TOP-CHECK Dual, but without measurement on non-ferrous metals
The List-Magnetik TOP-CHECK Ferro-1000 coating thickness meters use a probe that requires little contact area and low pressure. The compact devices are barely larger than a measuring probe and are particularly suitable for measuring thin layers on uneven or complex ground, for example tinplate cans.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK DX, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK DX, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm. The probe head is pivotable by 90°.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master / Pocket, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm. The probe head can be swiveled 90°.
Eddy current probe PN-6 for MEGA-CHECK Basic / Profi / Master, for coating thickness measurement on non-ferrous metal base (Aluminum, brass, copper, bronze, non-magnetic stainless steels), up to 6 mm. Scope of supply: Probe PN-6 with calibration base plate 3 mm.
The List-Magnetik FERRITE-CHECK 140 ferrite content meter is a compact and handy device with an integrated probe for measuring the ferrite content in austenitic and duplex steels according to the Basel standard DIN EN ISO 8249 using the magnetic induction method.
Is your stainless steel magnetizable? Measure the permeability.
List-Magnetik Ferromaster - Instrument for easy measurement of the relative magnetic permeability µr of feebly magnetic materials and workpieces with a permeability between 1.001 and 1.999. The permeability is measured by touching the workpiece with the probe tip and reading the result from the display.
Magnet permeability probe FPC-5 for measurement with the magnet permeability meter FerroPro compact
The handy magnetic field meter List-Magnetik MP-1000 with externally connectable transversal and axial field probes measures exactly magnetic fields of all kinds such as equal fields, alternating fields and pulse fields. The device is also excellently suited for residual magnetism.
The universal device is easy to operate: a single touch pressure is sufficient to precisely measure magnetic field strengths. The field of application ranges from the weak earth magnetic field up to 20,000 A/cm in strong fields.
Experience a revolution in measurement technology with the List-Magnetik MP-4000 professional magnetic field meter. This instrument uses external digital axial and transverse field probes to make precise measurements of DC and AC magnetic fields, as well as pulsed fields of any type. Applications range from geomagnetic fields to field strengths of 40,000 A/cm.
It supports a wide range of magnetic field measurement applications with flexible data storage, a combined digital and analog display, and peak value measurement. The Bluetooth interface allows data transfer to a Windows PC as well as to Android and iOS apps. The USB-C interface allows the device to be permanently connected to an external power source.
The small, compact magnetic field measuring device List-Magnetik MP-800AL works just as precisely as the bigger ones. It is easy to use and measures exact DC and AC fields, as well as maximum values for pulse fields. Thanks to different measuring ranges and measurement units such as A/cm, Gauss/Oersted, (Milli-)Tesla the device fulfills every requirement.
List-Magnetik MP-800TL differs from MP-800AL only in the probe: it has a transversal field probe (1.7 mm thickness with Hall Sensor distance of 0.9 mm) instead of an axial probe.
The small, compact magnetic field measuring device List-Magnetik MP-810 works just as precisely as the bigger ones. It is easy to use and measures exact DC and AC fields, as well as maximum values for pulse fields. Thanks to different measuring ranges and measurement units such as A/cm, Gauss/Oersted, (Milli-)Tesla the device fulfills every requirement.