Calibration foil set with manufacturer's certificate for checking the calibration of coating thickness meters. The calibration foil set is supplied with 4 calibration foils in the range of 30-300 ?m and a ceramic calibration plate of 1000 ?m. The certificate is traceable to Physikalisch-Technische Bundesanstalt (PTB) Braunschweig.
Calibration Base Plate FE to calibrate the Coating Thickness Meters on ferrous metals. By direct application, a zero calibration is carried out, and by the additional use of a calibration foil a two-point calibration.
Calibration Base Plate NFE to calibrate the Coating Thickness Meters on non-ferrous metals (aluminum). By direct application, a zero calibration is carried out, and by the additional use of a calibration foil a two-point calibration.
Calibration foil approx. 300 µm for two-point calibration of Coating Thickness Meters (other foil thicknesses on request)
Calibration foil approx. 100 µm for two-point calibration of Coating Thickness Meters (other foil thicknesses on request)
With this USB interface cable, you can connect the coating thickness meters MEGA-CHECK Profi and MEGA-CHECK Master as well as the magnetic field meter MP-2000 to a PC. Since the end of 2016, it has been supplied as standard with these devices.
Charger for coating thickness meters MEGA-CHECK (MEGA-CHECK Basic / Profi / Master, since 2007) and magnetic field meter MP-2000. Supplied with 3 rechargeable 1.2V NiMH batteries