You will find a variety of probes to suit your specific requirements. Please note: The combined oscillating probe is designed for using both measuring techniques. You can work with both methods on all metals, with automatic detection of the substrate. The 90° swivel-mounted probe allows you to measure even in the most difficult-to-reach corners and openings.
All our coating thickness gauges are "Made in Germany".
List-Magnetik TOP-CHECK coating thickness meters work with an integrated, unique 90° swivel-mounted probe. The compact devices are barely larger than a measuring probe and are therefore ideally suited for on-site applications in places which are difficult to access.
like TOP-CHECK Dual, but without measurement on non-ferrous metals
The List-Magnetik TOP-CHECK Ferro-1000 coating thickness meters use a probe that requires little contact area and low pressure. The compact devices are barely larger than a measuring probe and are particularly suitable for measuring thin layers on uneven or complex ground, for example tinplate cans.
You can connect many specialized digital probes to the List-Magnetik MEGA-CHECK DX coating thickness meter. Applications on particularly small openings, on thick coatings and on small measuring points are thus easily possible. Special functions such as scan measurement for rough surfaces and duplex measurement for galvanized and additionally coated steel round off the performance spectrum.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK DX, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK DX, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm. The probe head is pivotable by 90°.
Magnetic inductive probe for MEGA-CHECK DX for coating thickness measurement on iron and steel base up to 5 mm
Magnetic inductive probe for MEGA-CHECK DX for coating thickness measurement on iron and steel base up to 5 mm. The probe head is pivotable by 90°.
Magnetic inductive springy sensing probe for MEGA-CHECK DX for coating thickness measurement for especially small parts and areas, on uneven or complex iron and steel base, up to 1 mm.
Magnetic inductive two-pole probe for MEGA-CHECK DX, for coating thickness measurement of very thick coatings, on iron and steel base, up to 30 mm. Scope of supply: Probe DX30-F with calibration base plate 5 mm
Rod-shaped transversal probe for MEGA-CHECK DX for coating thickness measurement in very small interior spaces such as gear teeth and grooves on substrate iron and steel up to 1 mm. The measurement takes place at right angles to the probe.
Rod-shaped transversal probe for MEGA-CHECK DX for coating thickness measurement in small interior spaces or pipes on substrate iron and steel up to 3 mm. The measurement takes place at right angles to the probe.
The List-Magnetik MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without any problems.
MEGA-CHECK Basic is the standard device for rapid on-site measurement.
The List-Magnetik MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without any problems.
MEGA-CHECK Profi is based on the MEGA-CHECK Basic, and additionally, has a data logger and an RS232 interface. The easy statistical evaluation and documentation of the measurement results is carried out via a connected PC or a printer. Three calibration memories are available to store special parts calibrations.
The LIST-MAGNETIK MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without problems.
MEGA-CHECK Master is a high-end device with easy to use functions for many different applications. In addition to the performance of MEGA-CHECK Profi, MEGA-CHECK Master has a scan function for determining the thickness of the coating on rough or blasted surfaces.
Furthermore, there is a duplex function for the precise determination of the individual layer thickness for measurements of insulating layers on galvanized steel parts.
In the case of continuous measurement of the layer thickness, the analogous representation of the measured value profile proves to be an important support.
Magnetic inductive probe for MEGA-CHECK Basic / Profi / Master / Pocket for coating thickness measurement on iron and steel base up to 5 mm
Magnetic inductive probe for MEGA-CHECK Basic / Profi / Master for coating thickness measurement on iron and steel base up to 5 mm. The probe head can be swiveled 90°.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master / Pocket, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm.