Axial Field Probe P-A4 to measure magnetic fields with MP-2000 The axial field probe measures the field along the longitudinal axis of the probe and is suitable for measuring on planar or curved surfaces and particularly in bores. The hall sensor in the axial probe is placed at a precise distance of 2 mm to the surface. |
|
Technical Data: |
|
Measuring range: |
0-40,000 A/cm / 0-40,000 Gauss / 0-4 T |
Hall Sensor distance: |
2.0 mm |
Total length of the probe: |
150 mm |
Length of the probe handle: |
85 mm |
Diameter of the probe tube: |
7.5 mm |
Warranty:
|
3 months |
Customs tariff no.:
|
9031 8080 |
Transversal Field Probe P-T4 to measure magnetic fields with MP-2000
The transversal field probe measures the field in a 90 degree angle to the axis of the probe.
A calibration standard is a reference magnet with which an axial or tangential measuring probe matched to it can be checked for accuracy by the user.
The calibration standard is only available as an accessory for a List-Magnetik magnetic field meter with axial or tangential probe (P-A2, P-A4, P-T2, P-T4, MP-800), not for reed probes or for devices of other manufacturers. When ordering, please let us know for which probe the calibration standard is to be used.
Is your stainless steel magnetizable? Measure the permeability.
List-Magnetik Ferromaster - Convenient and robust instrument for measuring the relative magnetic permeability µr between 1 and 5
Transversal Flexible Reed Probe P-Z4 to measure magnetic fields with MP-2000
The transversal flexible reed probe is a tangential field sensor and measures the field in a 90 degree angle to the axis of the probe. It is flexible by approx. 5 degrees.
With this USB interface cable, you can connect the coating thickness meters MEGA-CHECK Profi and MEGA-CHECK Master as well as the magnetic field meter MP-2000 to a PC. Since the end of 2016, it has been supplied as standard with these devices.
This Product was added to our catalogue on 18/06/2010.