Ultrasonic Thickness Gauge MX-2
The Ultrasonic Measuring Technique is used to measure the thickness of steel and all other metals, glass and homogenous plastics and to detect material flaws, corrosion and pits. The main advantage of ultrasonic measurement over traditional methods is that ultrasonic measurement can be performed with access to only one side of the material being measured. Ultrasonic gauges are used in the automotive, aircraft, machine and tool industry and especial to check the residual thickness of tanks and tubes.
The devices MX-1, MX-2, MX-3 and MX-5DL work with dual-element (transmit and receive) transducers, which not only measure the thickness of materials of 0.7 mm and up, but are as well suitable to detect material flaws, corrosion and pits. A wide selection of dual-element transducers for any material, geometry and different applications is available. The correct setting of the correct sound velocity, which depends solely on the material, is significant to a successful measurement.
MX-2 is a fixed velocity gauge that requires no special training to operate. It contains eight sonic velocities of common materials and 2 sonic velocities that the user can set via PC.Technical Data:Measuring Range:
depending on material/transducer 0.7 - 500 mmSonar Velocity Range:
1250 – 10000 m/secResolution:
4½ digit LCD, backlightMeasurement:
4 readings per secondTemperature Range:
-20° to 50° CPower Supply:
2x 1.5V AA MignonOperating time:
approx. 130 hoursDimensions:
120 x 65 x 32 mmWeight:
295 g (with batteries)Scope of supply:MX-2 including transducer T-102-2000 (5 MHz, ø 6.35 mm, measuring range 0.7-150 mm), USB cable, coupling gel, certificate and case