Tangential Field Probe P-T4

The List-Magnetik MP-2000 high-end magnetic field measuring device with externally connectable axial and tangential field probes performs exact measurements of magnetic direct and alternating fields and pulse fields of all types. The application range extends from the earth's magnetic field to a field strength of 40,000 A/cm.

Versatility in the application is provided by the built-in data logger, the combined digital and analog display as well as the optional data transfer via USB.

• Measuring units: A/cm - kA/m - Gauss(Oe) - Tesla
• Applicable measuring probes: Axial probes P-A2, P-W2 and P-A4, Tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A
• Measuring range DC: 0-40,000 A/cm
• Measuring range AC: 20-40,000 A/cm
• Accuracy: in the homogeneous field ± 1 A/cm up to 50 A/cm, ± 2 % of measured value from 50 A/cm, ± 3 % of measured value from 20,000 A/cm
• Data logger: 10,000 measurements, divisible into 100 batches
• Statistics: Count / Maximum / Minimum / Average / Standard deviation
• Interface: RS232 interface with USB cable for communication with PC and printer
• Warranty: 12 months
• Customs tariff no.: 9031 8080

A calibration standard is a reference magnet with which an axial or tangential measuring probe matched to it can be checked for accuracy by the user.

• Reference value: 180 A/cm
• Warranty: 12 months
• Customs tariff no.: 8505 1100

The calibration standard is only available as an accessory for a List-Magnetik magnetic field meter with axial or tangential probe (P-A2, P-A4, P-T2, P-T4, MP-800), not for reed probes or for devices of other manufacturers. When ordering, please let us know for which probe the calibration standard is to be used.

Axial Field Probe P-A4 to measure magnetic fields with MP-2000

The axial field probe measures the field along the longitudinal axis of the probe.

• Measuring range: 0-40,000 A/cm / 0-40,000 Gauss / 0-4 T
• Warranty: 3 months
• Customs tariff no.: 9031 8080

With this USB interface cable, you can connect the coating thickness meters MEGA-CHECK Profi and MEGA-CHECK Master as well as the magnetic field meter MP-2000 to a PC. Since the end of 2016, it has been supplied as standard with these devices.

Flexible Reed Probe P-Z4 to measure magnetic fields with MP-2000

The flexible reed probe is a tangential field sensor and measures the field in a 90 degree angle to the axis of the probe. It is flexible by approx. 5 degrees.

• Measuring range: 0-40,000 A/cm / 0-40,000 Gauss / 0-4 T
• Warranty: 3 months
• Customs tariff no.: 9031 8080