Coating Thickness Meter MEGA-CHECK DX You can connect many specialized digital probes to the List-Magnetik MEGA-CHECK DX coating thickness meter. Applications on particularly small openings, on thick coatings and on small measuring points are thus easily possible. Special functions such as scan measurement for rough surfaces and duplex measurement for galvanized and additionally coated steel round off the performance spectrum. A completely newly developed digital probe technology allows very stable measurements due to its high sampling rate. For absolutely interference-free and precise measurement, the signals are already digitized in the probe. This results in very accurate, reproducible measurements. At List-Magnetik you will find a wide range of probes for FE metals (iron and steel) and NFE metals (non-ferrous metals such as aluminum, brass, copper, bronze and non-magnetic stainless steel) as well as combined probes with automatic detection of the base material. The magnetic induction method allows measurements of paint, varnish, plastic, rubber, ceramics, zinc plating and galvanic coatings on steel. The eddy current method allows you to measure insulating coatings (paint, lacquer, plastic, anodizing) on non-ferrous metals. The coating thickness gauge has a graphical LCD touch panel with an innovative operator guidance and a resolution of 320x480 pixels. The menu guidance is in German and English, further language packages can be installed. The blue silicone frame effectively protects the housing from damage. With the flexibly divisible measured value memory, the freely definable calibration memories and the Bluetooth Low Energy interface to Windows, Android or iOS, you have all the possibilities to record and further process your measured values. The scan function allows you to scan a workpiece over a rough surface and statistically evaluate the data. With the additional analog display, the visualization of the measured values is supplemented to recognize trends and peak values even from the corner of your eye. The duplex function simultaneously records the single layer thickness when measuring insulating layers on galvanized steel parts. Power can be supplied by 3 AA batteries or an external source connected via USB. Thus, you can operate the device with a power bank or on the AC adapter. The probe cable, which can be plugged in at both ends, connects the display unit and digital probe and can be replaced effortlessly if the cable breaks. All List-Magnetik MEGA-CHECK coating thickness gauges are high-quality products "Made in Germany". |
|
Technical data:
|
|
Application:
|
Depending on the selection of the probe |
Standards:
|
ISO 2178, ISO 2360, BS 5411, ASTM |
Measuring probe:
|
The measuring range is depending on the probe, |
Accuracy:
|
unter 100 µm ± 1 µm, 100-1000 µm: ± 1 %, 1000-2000 µm: ± 3 %, > 2000 µm: ± 5 % |
Resolution:
|
1-100 µm: 0.1 µm, 100-1000 µm: 1 µm, > 1000 µm: 10 µm |
Measuring units:
|
µm and mils |
Ambient temperature:
|
0 - 50° C |
Display:
|
LCD touch panel color 320x480 pixel |
Multilingual menu navigation:
|
German, English, Italian, French, Spanish |
Scan function:
|
for accurate measurement on rough or blasted surfaces |
Duplex function:
|
: for the exact determination of the individual layer thickness for measurements of insulating layers on galvanized steel parts (the zinc layer must be > 60 µm) |
Data logger:
|
10,000 measurements, flexibly divisible |
Statistics:
|
Count / Maximum / Minimum / Average / Standard deviation |
Calibration memory:
|
flexible number of calibration configurations storable |
Interface:
|
Bluetooth Low Energy interface for communication with Android, iOS and Windows |
App for Android, iOS, Windows:
|
free of charge via Google Play Store, Apple App Store, List-Magnetik homepage |
External control:
|
via USB-C and SCPI communication interface |
Power supply:
|
3x 1.5 V AA Mignon. External power supply can be connected via USB-C |
Operating time:
|
approx. 25 hours with battery, unlimited with external power supply |
Dimensions:
|
150 x 85 x 35 mm |
Weight:
|
320 g with batteries |
Warranty:
|
24 months |
Customs tariff no.:
|
9031 8020 |
Applicable measuring probes:
|
Scope of supply:
MEGA-CHECK DX, without probe, with probe cable, USB Bluetooth receiver, calibration base plates FE+NFE, 2 calibration foils and case, including calibration certificate.
The measuring probe must be ordered additionally.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK DX, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK DX, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm. The probe head is pivotable by 90°.
This Product was added to our catalogue on 08/07/2023.