Products description
|
Dual function probe PFN-52D Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm. The probe head can be swiveled 90°.
|
|
|
Technical Data:
|
|
| Model: | probe with spring-loaded guide and prism to fit on convex surface, swivel-mounted |
| Measuring Technique: | magnetic inductive + eddy current |
| Measuring Range: | FE 0-5000 µm, NFE 0-2000 µm |
| Smallest Area: | ø 8 mm |
| Smallest curvature radius: | convex: FE 4 mm, NFE 6 mm, concave: 38 mm |
| Calibration value: | 300 µm |
| Warranty: | 3 months |
| Customs tariff no.: | 9031 9000 |
Customers who bought this product also bought the following products:
Calibration foil set with manufacturer's certificate for checking the calibration of coating thickness meters. The calibration foil set is supplied with 4 calibration foils in the range of 30-300 ?m and a ceramic calibration plate of 1000 ?m. The certificate is traceable to Physikalisch-Technische Bundesanstalt (PTB) Braunschweig.
The LIST-MAGNETIK MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without problems.
MEGA-CHECK Master is a high-end device with easy to use functions for many different applications. In addition to the performance of MEGA-CHECK Profi, MEGA-CHECK Master has a scan function for determining the thickness of the coating on rough or blasted surfaces.
Furthermore, there is a duplex function for the precise determination of the individual layer thickness for measurements of insulating layers on galvanized steel parts.
In the case of continuous measurement of the layer thickness, the analogous representation of the measured value profile proves to be an important support.
- Applications, measuring range, smallest measuring area: depending on the connected probe
- Accuracy: less than 100 µm ± 1 µm, 100-1000 µm: ± 1%, 1000-2000 µm: ± 3%,> 2000 µm: ± 5%
- Analog display: Analog measured value display with continuous measurement
- Scan function: for accurate measurement on rough or blasted surfaces
- Duplex function: for the exact determination of the individual layer thickness for measurements of insulating layers on galvanized steel parts
- Data logger: 10,000 measurements, divisible into 100 batches
- Statistics: Count / Maximum / Minimum / Average / Standard deviation
- Calibration memory: 3 calibration memories for storing individual calibrations
- Interface: RS232 interface with USB cable for communication with PC and printer
- Warranty: 12 months
- Customs tariff no.: 9031 8020
The List-Magnetik MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without any problems.
MEGA-CHECK Profi is based on the MEGA-CHECK Basic, and additionally, has a data logger and an RS232 interface. The easy statistical evaluation and documentation of the measurement results is carried out via a connected PC or a printer. Three calibration memories are available to store special parts calibrations.
- Applications, measuring range: depending on the connected probe
- Accuracy: less than 100 µm ± 1 µm, 100-1000 µm: ± 1%, 1000-2000 µm: ± 3%,> 2000 µm: ± 5%
- Data logger: 10,000 measurements
- Statistics: Count / Maximum / Minimum / Average / Standard deviation
- Calibration memory: 3 calibration memories for storing individual calibrations
- Interface: RS232 interface with USB cable for communication with PC and printer
- Warranty: 12 months
- Customs tariff no.: 9031 8020
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master / Pocket, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm.
- Warranty: 3 months
- Customs tariff no.: 9031 9000
With this USB interface cable, you can connect the coating thickness meters MEGA-CHECK Profi and MEGA-CHECK Master as well as the magnetic field meter MP-2000 to a PC. Since the end of 2016, it has been supplied as standard with these devices.
The List-Magnetik MEGA-CHECK series of coating thickness meters can be used to connect many specialized probes. Applications at particularly small openings, thick layers and small measuring points are therefore possible without any problems.
MEGA-CHECK Basic is the standard device for rapid on-site measurement.
- Applications, measuring range: depending on the connected probe
- Accuracy: less than 100 µm ± 1 µm, 100-1000 µm: ± 1%, 1000 - 2000 µm: ± 3%,> 2000 µm: ± 5%
- Warranty: 12 months
- Customs tariff no.: 9031 8020
This Product was added to our catalogue on 17/06/2010.
Die Box kann unter tpl_modified_responsive/boxes/box_miscellaneous.html verändert werden. Die Sprachvariablen befinden sich in der Datei tpl_modified_responsive/lang/german/lang_german.custom.