Coating Thickness Meter MEGA-CHECK Master You can connect many specialized probes to the List-Magnetik MEGA-CHECK, Basic, Profi or Master coating thickness gauges. Applications with particularly small openings, thick layers and small measuring points are thus easily possible. Special functions such as the scan measurement for rough surfaces, and the duplex measurement for galvanized, and additionally coated steel complete the performance spectrum. The signals are already digitized in the probe for an absolutely interference-free and precise measurement. This results in very accurate, reproducible measurements. At List-Magnetik, you will find a wide range of probes for FE metals (ferrous metals) and NFE metals (non-ferrous metals such as aluminum, brass, copper, bronze and non-magnetic stainless steel) as well as combined probes with automatic recognition of the base material. The combined probe with swivel-mounted head is unique worldwide. The magnet-inductive method allows measurements on all types of paints, varnishes, plastics and galvanic coatings on steel. With the eddy current method, you measure insulating layers (color, varnish, plastic, anodic) on non-ferrous metals. All devices have a large and clear graphic display. The menu is given in German, English, Spanish or Dutch. The probe cable, which can be plugged in on both sides, connects the display unit and the probe and can be easily replaced in the event of a cable break. All List-Magnetik MEGA-CHECK coating thickness meters are high-quality products "Made in Germany". MEGA-CHECK Master is a high-end device with easy to use functions for many different applications. In addition to the functions of MEGA-CHECK Profi, the device offers a scan function for the determination of the layer thickness on rough or blasted surfaces as well as the duplex function for the exact determination of the individual layer thicknesses of insulating layers on galvanized steel parts. In the case of continuous measurement of the layer thickness, the analogous representation of the measured value profile proves to be an important support.
|
|
Technical data:
|
|
Applications:
|
Depending on the selection of the probe |
Standards:
|
ISO 2178, ISO 2360, BS 5411, ASTM |
Measuring probe:
|
The measuring range is depending on the probe, |
Accuracy:
|
unter 100 µm ± 1 µm, 100-1000 µm: ± 1 %, 1000-2000 µm: ± 3 %, > 2000 µm: ± 5 % |
Resolution:
|
1-100 µm: 0.1 µm, 100-1000 µm: 1 µm, > 1000 µm: 10 µm |
Measuring units:
|
µm and mils |
Environment temperature:
|
0 - 50° C |
Display:
|
Graphic display |
Multilingual menu navigation:
|
German / English / Spanish / Dutch |
Analog display:
|
Analog measured value display with continuous measurement |
Scan function:
|
for accurate measurement on rough or blasted surfaces |
Duplex function:
|
: for the exact determination of the individual layer thickness for measurements of insulating layers on galvanized steel parts (the zinc layer must be > 60 ?m) |
Data logger:
|
10,000 measurements, divisible into 100 batches |
Statistics:
|
Count / Maximum / Minimum / Average / Standard deviation |
Calibration memory:
|
3 calibration memories for storing individual calibrations |
Interface:
|
RS232 interface with USB cable for communication with PC and printer |
Power supply:
|
3x 1.5 V AA Mignon |
Operating time:
|
approx. 60 hours |
Dimensions:
|
198 x 92 x 35 mm |
Weight:
|
265 g (with batteries) |
Warranty:
|
12 months |
Customs tariff no.:
|
9031 8020 |
Applicable measuring probes:
Recommended Optionals:
|
Scope of supply:
MEGA-CHECK Master, without probe, with probe cable, USB cable, calibration base plates FE + NFE, 2 calibration foils and case, including calibration certificate. The probe must be ordered separately.
Calibration foil set with manufacturer's certificate for checking the calibration of coating thickness meters. The calibration foil set is supplied with 4 calibration foils in the range of 30-300 ?m and a ceramic calibration plate of 1000 ?m. The certificate is traceable to Physikalisch-Technische Bundesanstalt (PTB) Braunschweig.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm. The probe head can be swiveled 90°.
With this USB interface cable, you can connect the coating thickness meters MEGA-CHECK Profi and MEGA-CHECK Master as well as the magnetic field meter MP-2000 to a PC. Since the end of 2016, it has been supplied as standard with these devices.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master / Pocket, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm.
This Product was added to our catalogue on 22/04/2009.