Coating Thickness Meter MEGA-CHECK Basic You can connect many specialized probes to the List-Magnetik MEGA-CHECK, Basic, Profi or Master coating thickness gauges. Applications with particularly small openings, thick layers and small measuring points are thus easily possible. Special functions such as the scan measurement for rough surfaces, and the duplex measurement for galvanized, and additionally coated steel complete the performance spectrum. The signals are already digitized in the probe for an absolutely interference-free and precise measurement. This results in very accurate, reproducible measurements. At List-Magnetik, you will find a wide range of probes for FE metals (ferrous metals) and NFE metals (non-ferrous metals such as aluminum, brass, copper, bronze and non-magnetic stainless steel) as well as combined probes with automatic recognition of the base material. The combined probe with swivel-mounted head is unique worldwide. The magnet-inductive method allows measurements of paints, varnishes, plastics, zinc and galvanic coatings on steel. With the eddy current method, you measure insulating layers (color, varnish, plastic, anodic) on non-ferrous metals. All devices have a large and clear graphic display. The menu is given in German, English, Spanish or Dutch. The probe cable, which can be plugged in on both sides, connects the display unit and the probe and can be easily replaced in the event of a cable break. All LIST-MAGNETIK MEGA-CHECK coating thickness meters are high-quality products "Made in Germany". MEGA-CHECK Basic is the standard device for rapid on-site measurement. Flexibly usable by connecting different measuring probes.
|
|
Technical data:
|
|
Applications:
|
Depending on the selection of the probe |
Standards:
|
ISO 2178, ISO 2360, BS 5411, ASTM |
Measuring probe:
|
The measuring range is depending on the probe, |
Accuracy:
|
unter 100 µm ± 1 µm, 100-1000 µm: ± 1 %, 1000-2000 µm: ± 3 %, > 2000 µm: ± 5 % |
Resolution:
|
1-100 µm: 0.1 µm, 100-1000 µm: 1 µm, > 1000 µm: 10 µm |
Measuring units:
|
µm and mils |
Environment temperature:
|
0 - 50° C |
Display:
|
Graphic display |
Multilingual menu navigation:
|
German / English / Spanish / Dutch |
Power supply:
|
3x 1.5 V AA Mignon |
Operating time:
|
approx. 60 hours |
Dimensions:
|
198 x 92 x 35 mm |
Weight:
|
265 g (with batteries) |
Warranty:
|
12 months |
Customs tariff no.:
|
9031 8020 |
Applicable measuring probes:
Recommended Optionals:
|
Scope of supply:
MEGA-CHECK Basic, without probe, with probe cable, calibration base plates FE + NFE, 2 calibration foils and case, including calibration certificate. The probe must be ordered separately.
Magnetic inductive two-pole probe for MEGA-CHECK Basic / Profi / Master, for coating thickness measurement of very thick coatings, on iron and steel base, up to 30 mm. Scope of supply: Probe PF-30 with calibration base plate 5 mm
Magnetic inductive probe for MEGA-CHECK Basic / Profi / Master for coating thickness measurement on iron and steel base up to 5 mm. The probe head can be swiveled 90°.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm. The probe head can be swiveled 90°.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master / Pocket, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm.
Transversal Flexible Reed Probe P-Z4 to measure magnetic fields with MP-2000
The transversal flexible reed probe is a tangential field sensor and measures the field in a 90 degree angle to the axis of the probe. It is flexible by approx. 5 degrees.
This Product was added to our catalogue on 21/04/2009.