Pulse Magnetizing Yoke

The most established magnetization process

The yoke magnetization process is the most established process for magnetizing permanent magnets and permanent magnetic systems. It is particularly suitable for magnetizing 2-pole ferrite or AlNiCo magnet systems.

Due to the high functional reliability when used in flow production, and due to the very favorable price-performance ratio, the yoke magnetization process is still used especially in automatic manufacturing technology. Our magnetizing yokes are made from a special electrical sheet to ensure a loss-free pulse curve.

As an option we deliver for all magnetizing yokes:

  • Any desired connection voltage
  • Suitable pole inserts for magnets and magnet systems, on request with fluxmetric measuring coils for measuring the magnetic flux
  • Current monitoring to control the magnetization field strength
  • Suitable manual workstations with automatic feeding of the systems to be magnetized into the magnetizing yoke
Magnetizing Yoke EM-5J and Pulse Generator IG-10

Schematic representation of the geometry


Pulse Magnetizing Yoke

Diagram Magnetizing Pulse


Pulse Magnetizing Yoke

Technical Data and Dimensions [mm]

Type A B C D E F G Pole cross-section Coil dimension Max.Ampere turns Weight [kg]
EM-2/J 386 44 100 180 44 180 10-80 80 x 44 170 x 120 28.000 AW 40
EM-3/J 280 50 50 190 80 200 72 80 x 60 180 x 180 30.000 AW 45
EM-5/J 510 100 90 245 120 360 100 100 x 100 230 x 230 51.000 AW 80
EM-6/J 570 120 90 265 140 360 120 120 x 120 260 x 260 66.000 AW 120