Magnetic Field Meter

Magnetic Field Meter MP-1000

to measure all kinds of steady and alternating fields

Magnetic field meter MP-1000


The LIST-MAGNETIK MP-1000 magnetic field meter is a handy universal device with externally connectable tangential and axial field probes for the precise measurement of all types of magnetic fields: steady DC fields, alternating AC fields and pulsed fields.

With the easy one-button operation, magnetic field strength can be measured from the weak earth magnetic field up to strong field s of 20,000 A/cm, switchable in Gauss/Oersted.

A separate built-in micro controller in the MP-1000's measuring probes digitizes and linearizes the analog measurement signals of the hall sensor into the probe. This gives an extremely trouble-free and precise measurement, especially at high magnetic field strengths. The probe cable is pluggable at both ends, at the display unit and the probe, which is particularly service-friendly, as the cable can simply be replaced if it becomes faulty. Applications of the MP-1000 are the test for residual magnetism, the measurement of magnetic fields of all kinds, as well as the localization of stray fields for crack detection.

Technical Data
Measurement Units: A/cm - Gauss(Oe) switchable
(1 A/cm = 1.256 Gauss = 1.256 Oersted)
Applicable measuring probes: axial probes P-A2 and P-W2, tangential probes P-T2 and P-Z2
Measuring range DC: 0-20,000 A/cm
Measuring range AC: 20-20,000 A/cm
Accuracy: in the homogeneous field ± 2% of the measured value ± 1 digit
Resolution: 0–100 A/cm: 0.1 A/cm
>= 100 A/cm: 1 A/cm
>= 1,000 A/cm: 10 A/cm
>= 10,000 A/cm: 100 A/cm
AC Frequency Range: 10 Hz – 5 kHz
Peak Hold: with Impulse duration >= 0.1 msec.
Display: LCD display 3 digit
Power Supply: 2x 1.5 V AA Mignon
Operating time: approx. 35 h
Dimensions: 105 x 65 x 26 mm
Weight: 137 g with batteries


Scope of supply:

MP-1000 without probe, with probe cable and case, including calibration certificate.
The measuring probe needs to be ordered separately

Recommended Optionals:

Precision Calibration Standard 180 A/cm