Coating Thickness Meters

MEGA-CHECK Pocket

with external digital measuring probe for measuring coatings on metal ground

Coating Thickness Meter MEGA-CHECK Pocket

 

With the LIST-MAGNETIK MEGA-CHECK Pocket coating thickness meters, you can carry out exact, reproducible measurements. The measuring probes digitize the signals in the probe before they are transmitted to the measuring device via the probe cable. The probe cable, which can be plugged in on both sides, connects the display unit and probe, and can be easily replaced in the event of a cable defect.

With the press of a button MEGA-CHECK Pocket is easy to use. Thanks to the integrated ASR (Automatic-Statistic-Result) technology, the device can display the statistics of the past measurement series. If the MEGA-CHECK Pocket is switched on without a probe, the statistics of the last measurement series are automatically displayed one after the other. For details, please refer to our product video.

MEGA-CHECK Pocket FE measures insulating layers (varnish, paint, plastic, rubber, ceramics) and galvanic coatings (except nickel) on iron and steel substrates according to ISO 2178 with a magnet-inductive probe.

MEGA-CHECK Pocket FN uses a combined probe to measure insulating layers (paint, varnish, plastic, rubber, ceramics) and galvanic coatings (except nickel) on iron and steel substrates and non-ferrous metals based on the eddy current method- Brass, copper, bronze, non-magnetic stainless steels) according to ISO 2178 and ISO 2360.

 

Technical Data
Applications: Measurement of paint, varnish, plastic and galvanic coatings on steel (ISO 2178)
with MEGA-CHECK Pocket FN also on steel and non-ferrous metals (ISO 2360),
automatic detection of base material
Measuring probe
MEGA-CHECK Pocket FE:
Model PF-5,
Measuring range: on steel and iron: 0-5000 μm,
Smallest Area: ø 4 mm,
Smallest curvature radius: convex: 4 mm, concave: 38 mm,
Calibration value: 300 µm
Measuring probe
MEGA-CHECK Pocket FN:
Model PFN-52D,
Measuring range: on steel and iron: 0-5000 μm, on NFE metals: 0-2000 μm,
Smallest Area: ø 8 mm,
Smallest curvature radius: convex: FE 4 mm, NFE 6 mm, concave: 38 mm,
Calibration value: 300 µm
Accuracy: less than 100 μm: ± 1 μm, 100-1000 μm: ± 1%, 1000-2000 μm: ± 3%, > 2000 μm: ± 5%
Resolution: 1-100 µm: 0.1 µm, 100-1000 µm: 1 µm, > 1000 µm: 10 µm
Measuring units: µm and mils
Environment temperature: 0 - 50° C
Display: LCD display 3½ digit
Statistics: Count / Maximum / Minimum / Average / Standard deviation
Power supply: 2x 1.5 V AA Mignon
Operating time: approx. 35 hours
Dimensions: 105 x 65 x 26 mm
Weight: 137 g (with batteries)

 

Scope of supply:

MEGA-CHECK Pocket FE including measuring probe PF-5, with calibration base plate FE, 2 calibration foils and case

MEGA-CHECK Pocket FN including measuring probe PFN-52D, with calibration base plates FE+NFE, 2 calibration foils and case